Horizontal Roman blind rail system
For pergolas, terraces, conservatories
A roller blind suspended on aluminium tracks. Can be used on ready wooden, steel or concrete structures. Manually controlled. The roller blind consists of the fabric and the complete hanging system. The number of components in the set is selected according to the size of the roller blind ordered.
The roller blind is based on a system of aluminium guides attached to anti-wind beams. The fabric is attached to the guides by means of metal chains, to which special sliders are attached. The wavy fabric of the roller blind provides effective protection against the sun. Three standard colours of the guides and a wide range of fabrics make it possible to adjust the construction to various types of building. Aluminium tubes have been inserted across the roller blind into a sewn tunnel, thanks to which the roller blind rolls up smoothly into even folds and is stable. There is a choice of 2 types of outdoor fabrics.
The price of the roller blind applies to 1 m2, when placing your order please select the appropriate number of metres (round up 1m= from 0m to 1m2, 2m = from 1.1m to 2m,
3m= from 2.1m to 3m, etc.) Exact dimensions are given in the message to order (measurement instructions below).
The height of the roller blind can be adjusted by means of fixing chains. If there is no upper development, the roller blind should be fixed at a slight incline, so that water will run off the fabric freely in the rain.
OXFORD fabric - water-repellent
Outdoor ( garden ) fabric designed for outdoor use.
Bar width 160 cm. Weight 200 g/m2. Composition: 100% Polyester.
Stains and dirt should be removed with a soft sponge and a solution of water and soap (temp. 40ºC) or mild detergents. The fabric is reversible, water-repellent, very good drape, moderately light-permeable and highly resistant to discolouring and fading.
LUX fabric - water-repellent
Outdoor (garden) fabric designed for outdoor use.
Beam width 160 cm. Weight 190 g/m2. Composition: 100% Polyester.
Remove stains and dirt with a soft sponge and a solution of water and soap (temp. 40ºC), or mild detergents. Double-sided fabric, waterproof, very good drape, medium light transmission and high resistance to discolouration and fading.
Roller blind measurement :
In order for us to make your order to your exact size, we will need the measurements shown in the picture opposite :
Width A - when stating the width, please give us the exact dimension of the construction light. Please remember that the distance between the beams must be the same in every position for the blind to function properly.
Length B - specifying the length, please provide the exact dimension of the construction beam.
Dimension A1,A2, A3 - is the width between rafters measured from the centre to the centre of the next rafter.
One blind contains :
1. fabric sewn to size
2. stiffening rods
3. rails (aluminium guides)
5. mounting kit for attaching the roller blind to the pergola or terrace structure.
Actual fabric colours may differ from those displayed on your monitor. If in doubt, we encourage you to order fabric samples.